If you are short on time, here is what matters most:
- The Avail® IIIA Hatch adds ballistic protection at the armored rear hatch panel area, tested to NIJ Standard 0108.01 against specified handgun threats.
- Its integrated aluminum MOLLE panel provides attachment points for compatible equipment and is designed to hold up to 20 lbs of gear.
- The combined ballistic panel and MOLLE platform weigh less than 9 lbs and measure 0.33 inches thick.
- The compact design preserves OEM hatch functions.
- The panel is transferable between compatible makes and models. Confirm vehicle compatibility with Angel Armor before ordering.
Vehicle armor plays an important role in protecting law enforcement officers, but protection shouldn't be limited to the doors. When officers use their patrol vehicles for cover, the rear of the vehicle presents another area where additional ballistic protection can be valuable.
Angel Armor’s Avail® IIIA Hatch extends ballistic protection to the rear hatch area, helping agencies expand their vehicle's armored coverage beyond traditional door protection. By adding a dedicated ballistic panel to the rear hatch, agencies can create an additional protected area for officers operating around their vehicles.
Beyond ballistic protection, the Avail® IIIA Hatch incorporates an integrated aluminum MOLLE platform that provides a dedicated place for compatible equipment. The platform supports up to 20 lbs of gear, while the complete assembly weighs less than 9 lbs and is designed to preserve OEM hatch functions.
What Does the Integrated MOLLE Panel Add?
MOLLE stands for Modular Lightweight Load-carrying Equipment. The IIIA Hatch incorporates an aluminum MOLLE panel with slots for attaching compatible pouches and accessories.
This turns the hatch interior into an equipment-mounting platform. Agencies can plan a layout around their needs, using compatible equipment such as medical or utility pouches where fit and attachment requirements allow.
Designated mounting points give equipment a defined place. Agencies can use the hatch surface alongside their existing cargo layout to organize compatible gear around the way officers work.
The integrated MOLLE panel is designed to hold up to 20 lbs of gear. That capacity refers to the mounted equipment, not the weight of the armor assembly. Agencies should select equipment within the stated capacity and confirm that the planned attachments and layout are suitable.
Why Combine Police Vehicle Hatch Armor and Gear Mounting?
The IIIA Hatch gives agencies a way to address two fleet priorities on the same surface: added ballistic protection and organized equipment mounting.
The armored panel provides tested protection against specified handgun threats at the hatch panel area. The integrated MOLLE platform gives compatible equipment designated attachment points. Together, they make the hatch interior part of the vehicle’s protection and equipment plan.
For officers, that means a dedicated place for selected gear. For fleet managers, it means evaluating protection, mounting capacity and vehicle fit as one integrated product. The compact design preserves OEM hatch functions while adding both capabilities.
Adding Protection at the Rear Hatch
Vehicle protection should be evaluated around the areas covered and the threats each component is designed to address. The Avail® IIIA Hatch adds a dedicated ballistic panel at the rear hatch interior, extending the vehicle’s armor options beyond the doors.
The protection applies to the armored hatch panel area. It should not be interpreted as protection for the hatch window or the entire rear of the vehicle. Angel Armor can help agencies confirm coverage for their specific vehicle configuration.
The panel is tested to NIJ Standard 0108.01 for Level IIIA threat protection. The supplied threat specifications include 9mm Luger 124-grain FMJ and .44 Magnum 240-grain SWC GC at 1,400 ± 50 feet per second. The product offers multi-round defense against specified handgun threats.
These specifications describe handgun-threat protection; they do not establish rifle-threat protection. Agencies can request test reports from Angel Armor when reviewing the product for procurement.
Lightweight Protection With a Compact Profile
Adding protection and equipment mounting should work with the vehicle’s existing design. The Avail® IIIA Hatch is designed for a compact, clean interior finish without impacting OEM hatch functions.
The combined ballistic panel and MOLLE platform weigh less than 9 lbs and measure 0.33 inches thick. The ballistic panel alone is 0.20 inches thick. Keeping these measurements distinct helps agencies evaluate the complete assembly alongside their existing equipment.
The low-profile design brings ballistic protection and mounting capability to the same hatch surface. Agencies can review the fit with Angel Armor while considering their cargo layout and the equipment they intend to carry.
Compatibility and Transferability Across Your Fleet
The Avail® IIIA Hatch is available for leading vehicle models and is transferable between compatible makes and models.
Transferability gives agencies an option to consider when vehicles are replaced or reassigned. If the next vehicle is compatible, the panel may remain part of the fleet’s equipment plan.
Compatibility should be confirmed before purchase or transfer. Contact Angel Armor with the vehicle’s make, model and configuration so the team can help establish the appropriate fit. Agencies planning a transfer should confirm suitability for both the current and intended replacement vehicles. Angel Armor’s product support resources provide additional vehicle armor documentation and installation guides.
Take the Next Step for Your Fleet
Police vehicle hatch armor can do more than add a ballistic layer. With its integrated aluminum MOLLE platform, the Avail® IIIA Hatch brings tested handgun-threat protection and equipment-mounting capability to the rear hatch in a compact design.
Explore Angel Armor’s Level IIIA vehicle armor solutions or contact the team to discuss hatch coverage, compatibility and equipment requirements for your fleet.
Frequently Asked Questions
Does the IIIA Hatch protect the entire rear of the vehicle?
Protection applies to the armored hatch panel area. It should not be interpreted as coverage for the hatch window or the entire rear of the vehicle. Confirm vehicle-specific coverage with Angel Armor.
What handgun threats are listed in the product specifications?
The supplied specifications list 9mm Luger 124-grain FMJ and .44 Magnum 240-grain SWC GC at 1,400 ± 50 feet per second under NIJ Standard 0108.01 Level IIIA threat protection. The stated protection does not establish rifle-threat protection.
Is the 20-lb figure the panel’s weight or its gear capacity?
It is the stated gear capacity of the integrated MOLLE panel. The combined ballistic panel and MOLLE platform weigh less than 9 lbs.
What equipment can attach to the MOLLE panel?
The aluminum panel provides slots for compatible MOLLE pouches and accessories. Equipment selection should account for the stated 20-lb capacity, available space and suitable attachment requirements.
Will the IIIA Hatch affect OEM hatch functions?
The product is designed for a compact, clean interior finish without impacting OEM hatch functions. Confirm the appropriate fit for your vehicle with Angel Armor.
Can the panel transfer to another vehicle?
Yes, it is transferable between compatible makes and models. Confirm compatibility with Angel Armor before planning a transfer.
Is the IIIA Hatch NIJ certified?
The supplied product documentation describes testing to NIJ Standard 0108.01 for Level IIIA threat protection. Testing to this standard should not be described as NIJ certification. Contact Angel Armor for test reports and procurement documentation.
